The Welded Steel Truss Arch Solar Greenhouse is manufactured by Ruize in China for agricultural projects requiring a stronger arch structure and winter thermal protection. As a greenhouse manufacturer and supplier with factory-based production, Ruize uses a welded triangular truss as the main structural element, combining upper and lower members with diagonal supports to form an integrated arch frame.
This structure differs from a conventional round-tube arch greenhouse, where individual tubular members provide the primary support. The welded truss creates a more substantial load-bearing framework that is suitable for projects with larger spans and higher structural requirements, particularly in areas exposed to snow and strong seasonal winds.
The arch is formed from a welded triangular truss rather than a simple single-tube frame. The truss geometry helps distribute loads through the upper and lower members and diagonal supports, improving overall structural stiffness.
The supplied product specification states that the truss arches are tested for wind and snow load performance. Final structural dimensions and foundation requirements still need to be matched to the actual conditions of each installation site.
The smooth semi-circular roof provides a continuous curved covering surface with no broad flat roof section. Rainwater can drain along the curved surface, while snow can slide away under suitable conditions, helping reduce prolonged snow accumulation compared with a flat roof form.
For locations with heavy or prolonged snowfall, the greenhouse should still be designed according to the local snow load and weather conditions. Roof geometry, structural spacing and foundation design need to work together rather than relying on the arch shape alone.
The Welded Steel Truss Arch Solar Greenhouse retains the heat-management concept of a solar greenhouse by using an insulated rear wall structure. During daylight hours, solar heat enters through the covered front area, while the rear thermal section helps retain heat and slow nighttime temperature loss.
This combination makes the greenhouse suitable for winter cultivation where cold temperatures are a major operating concern. Additional thermal and heating equipment can be selected according to the local climate and crop requirements.
The curved roof provides a broad light-receiving surface and can be paired with suitable greenhouse film. The original configuration is intended to create a relatively even light environment inside the greenhouse, which is particularly useful for nursery production, flowers and premium fruits and vegetables.
Light distribution inside a greenhouse is affected by the roof structure, film material, weather and surrounding environment. The final covering configuration should therefore be selected according to the crop and local growing conditions.
The main steel frame uses hot-dip galvanizing as the primary corrosion-protection process. Welded areas receive additional treatment to help protect processed surfaces exposed during fabrication.
The supplied process includes hot-dip galvanizing and weld-area rust-prevention treatment. With suitable installation and maintenance, the frame is intended for long-term outdoor use in agricultural environments.
The truss structure can be used for large-span greenhouse planning where an open internal layout is important. Fewer internal obstructions can provide more usable room for crop rows, seedling areas, material handling and agricultural operations.
For connected agricultural parks, greenhouse units can be planned together with working aisles, equipment locations and access routes. The actual span and support arrangement should be determined according to the structural design and operating requirements of the project.
| Item | Configuration |
| Greenhouse Type | Welded Steel Truss Arch Solar Greenhouse |
| Roof Form | Semi-circular arch roof |
| Main Structure | Welded triangular steel truss arch |
| Surface Protection | Hot-dip galvanized steel with weld-area rust protection |
| Thermal Structure | Rear insulated thermal-retention wall structure |
| Project Layout | Large-span and connected greenhouse arrangements |
| Testing | Wind and snow load performance testing for the truss arch |
| Optional Systems | Thermal blanket, ventilation, air circulation, water-fertilizer, heating, shading and remote monitoring systems |
| Customization | Span, height, length, structural load requirements and supporting systems |
The Welded Steel Truss Arch Solar Greenhouse can be equipped with the systems listed in the original configuration to support temperature management, ventilation and crop production. The equipment combination should be selected according to the crop, greenhouse size and local climate.
For connected greenhouse projects, major equipment and piping can also be planned together as part of the overall agricultural layout.
The structure is intended for agricultural projects that need stronger arch framing together with winter thermal management.
The greenhouse can be designed around the environmental conditions of the installation site. Wind speed, snow load, elevation, greenhouse span and structural arrangement all influence the final truss specification.
This project-specific approach is especially important for high-altitude areas and other locations where strong winds, heavy snowfall or significant seasonal temperature changes are expected.
Ruize handles the main steel structure processing and greenhouse component production before shipment. Export projects can be supplied with structural drawings, load-related information, installation documents and technical videos to support overseas assembly.
For larger agricultural projects, one-to-one technical coordination and remote installation guidance can be arranged during construction. Original structural fittings and greenhouse film can also be supplied for later maintenance.
Routine maintenance should focus on the galvanized steel frame, welded areas, connecting components, greenhouse film, drainage system and environmental-control equipment. Inspections are particularly important before and after periods of heavy snow or strong wind.
The welded truss is designed as an integrated structural assembly, while the covering and supporting components can be maintained or replaced separately according to their condition.
The welded truss combines upper and lower structural members with diagonal supports to form a more integrated load-bearing frame. This provides greater structural stiffness and makes the configuration suitable for projects with larger spans or higher wind and snow load requirements.
The curved roof reduces broad flat surfaces where snow can remain and can help snow slide from the covering under suitable conditions. However, areas with heavy snowfall still require structural design based on the local snow load and site conditions.
The rear thermal wall complements the solar greenhouse concept by helping retain heat after daytime solar gain. This is useful for winter crop production where nighttime heat loss needs to be controlled.
Yes. For connected greenhouse projects, heating and water-fertilizer equipment can be planned together with the greenhouse layout. The final system arrangement depends on the size and operational requirements of the agricultural project.
Yes. The truss specification, span, structural spacing and supporting systems can be planned according to local wind, snow and elevation conditions. Covering and environmental-control equipment can also be selected according to the local growing environment.
Address
Daqiuzhuang Town, Jinghai District, Tianjin, China
Tel
If you have any enquiry about quotation or cooperation, please feel free to email us at ruizesteel@ruizegreenhouse.com or use the following inquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
Phone:+86-15602082226
WeChat:15602082226
Fax:+86-022-59580608
Web:www.ruizegreenhouse.com
Copyright © 2026 Tianjin Ruize Steel Co., Ltd. All Rights Reserved.
